Greater Seattle Service Area · King County

Custom Shower Doors & Mirrors in Federal Way, WA

Custom shower doors, tub doors, and mirrors installed in Twin Lakes, Redondo, and the surrounding Federal Way neighborhoods. Federal Way is the southern edge of our King County coverage, with an active mix of residential remodels and the occasional view-property project facing Puget Sound.

At a glance

Federal Way shower door & glass services

Custom shower doors; tub doors; mirrors; the occasional waterfront-view glass railing.

Local notes

Neighborhoods we work in

Twin Lakes and the neighborhoods around it date largely to the 1970s and 1980s, which makes framed-to-frameless upgrades the core of our work here. Redondo and Dash Point add view properties where exterior glass and railings face the Sound and the salt air that comes with it.

Frameless heavy-glass shower enclosure installed by IGo Green Enterprises in a Greater Seattle home

Frameless

Custom Frameless Shower Doors in Federal Way

A lot of Federal Way frameless work starts with a 1980s framed unit in a Twin Lakes bath. The frame comes off, the opening gets measured as built, and a frameless or semi-frameless door goes on the existing curb.

Frameless doors use 3/8" or 1/2" tempered glass with no perimeter frame; the structure runs through the hinges and clips. We build hinged single panels, corner enclosures, neo-angle units, and frameless sliders in 14 hardware finishes, and we replace existing framed or semi-frameless units on the same grade of glass as a new install.

Steam shower glass door with full perimeter gasket and transom, installed by IGo Green Enterprises in Greater Seattle

Steam & sauna

Steam shower & sauna doors in Federal Way

A steam enclosure is a different build from a standard shower door: continuous gaskets around the full perimeter, a header sealed against vapor, and hardware rated for the heat and humidity cycle. Sauna doors are their own spec, usually tempered glass set into a cedar or hemlock frame, and we coordinate frame dimensions with the sauna builder before fabrication.

Frameless glass stair railing on stainless standoff hardware, installed by IGo Green Enterprises in Greater Seattle

Railings

Glass railings for Federal Way decks, stairs & balconies

We install glass guard rails on stair runs, balconies, decks, and mezzanines in three system families: frameless standoff, base shoe, and framed post-and-rail with glass infill. Glass is tempered or laminated to code.

Elevated guardrails over 30" typically require a permit. In Federal Way that routes through City of Federal Way Community Development; we confirm the requirement at the consultation and provide spec documentation that supports inspection.

Framed glass wall partition along a staircase, installed by IGo Green Enterprises in Greater Seattle

Partitions

Glass wall partitions for Federal Way homes & offices

Glass partitions divide a space without cutting off the light: home offices, primary bath separations, conference rooms, and retail fit-outs. Framed or fully frameless, with sliding panels and integrated doors where the layout calls for them.

Specifications

Hardware, glass & finish options

Glass thickness, glass type, door style, and configuration choices. Fourteen hardware finishes shown below.

Glass thickness
3/8" standard for frameless; 1/2" for larger panels and where a heavier feel is wanted.
Door style
Pivot/swing, sliding/bypass, frameless slider, fixed panel, 90° return, neo-angle, three-piece corner.
Configurations
Custom-fit to the opening, including curbless walk-in, over-tub, half-wall (pony / knee wall), corner enclosure, and transom-topped steam.

Glass types

Eight glass options

View glass detail
  • Clear tempered glass shower door panel in a residential bathroom

    Clear Glass

    Clear

  • Low-iron Starphire glass panel with no edge tint visible

    Low-Iron / Ultra-Clear (PPG Starphire®)

    Clear

  • Bronze tinted shower glass panel with warm amber cast

    Bronze Tint

    Tinted

  • Gray tinted shower glass panel with cool neutral cast

    Gray Tint

    Tinted

  • Barock textured glass with irregular relief pattern

    Barock

    Textured

  • Rain textured glass with vertical line patterning

    Rain Glass

    Textured

  • P516 textured glass panel with a soft mist-like obscuring pattern that diffuses light

    P516 Textured Glass

    Textured

  • Satin-etched frosted glass panel with uniform matte surface

    Satin Etched

    Specialty

Hardware finishes

Fourteen finishes, color in hand

View hardware detail
  • Polished Chrome
  • Polished Nickel
  • Polished Stainless Steel
  • Polished Brass
  • Brushed Nickel
  • Brushed Stainless Steel
  • Satin Nickel
  • Satin Brass
  • Brushed Bronze
  • Dark Brushed Bronze
  • Matte Black
  • Gunmetal
  • Oil Rubbed Bronze
  • Unlacquered Brass

Process

How we work in Federal Way: design, measure, fabricate, install

  1. 01

    Free in-home design consultation

    Tim visits the home in Federal Way, discusses configuration, glass type, and hardware finish, and assesses any existing unit if it's a replacement. Typically 30 to 45 minutes. No obligation.

  2. 02

    Precision field measurement

    Final measurements happen after tile and plumbing fixtures are set. Walls are rarely plumb; the measure captures the actual geometry so the panels land flush.

  3. 03

    Custom fabrication

    Glass cut and tempered to your opening; hardware specced to glass weight. Typical lead time is 1.5 to 2 weeks for standard custom configurations. Specialty glass (Starphire, Barock) extends that.

  4. 04

    Professional installation or replacement

    On-site fitting, sealed and aligned. Most installs finish in a half-day, finished clean. Replacements use the same glass and hardware grade as new installs. No retrofit shortcuts.

Pricing

Pricing for Federal Way homeowners

No two openings are the same, so every project is priced after a free in-home measure.

What changes the price: glass thickness (3/8" vs 1/2"), hardware finish, low-iron upgrade, return panels, steam tops, and any custom notches around tile niches. We provide a free written quote after the in-home measure. The price you see is the price you pay.

Service area

Service area around Federal Way

We serve Federal Way regularly as part of our King County coverage. Measure visits typically schedule within a week of contact; phone is the fastest path when timing is tight.

Nearby cities

Our Puget Sound coverage beyond Federal Way includes Auburn , Bellevue , Burien , Des Moines , Issaquah , Kent , Kirkland , Puyallup , Redmond , Renton , Seattle , Tacoma , and Tukwila .

FAQ

Federal Way shower door & glass FAQ

Plan your project

Schedule a free Federal Way consultation

Phone is fastest. Form submissions get a reply within 1 business day. Most Federal Way measures land within 5 to 7 business days of contact.